AADJP=0, RTCOE=0, RESET=0, START=0, CNTMD=0, AADJE=0
RTC Control Register 2 (in Binary Count Mode)
| START | Start 0 (0): Stop the 32-bit binary counter, 64-Hz counter, and prescaler 1 (1): Operate the 32-bit binary counter, 64-Hz counter, and prescaler normally |
| RESET | RTC Software Reset 0 (0): In writing: Invalid (writing 0 has no effect). In reading: Normal time operation in progress, or an RTC software reset has completed. 1 (1): In writing: Initialize the prescaler and target registers for RTC software reset. In reading: RTC software reset in progress. |
| RTCOE | RTCOUT Output Enable 0 (0): Disable RTCOUT output 1 (1): Enable RTCOUT output |
| AADJE | Automatic Adjustment Enable 0 (0): Disable automatic adjustment 1 (1): Enable automatic adjustment |
| AADJP | Automatic Adjustment Period Select 0 (0): In normal operation mode, add or subtract the RADJ.ADJ[5:0] bits from the prescaler count value every 32 seconds. In low-consumption clock mode, add or subtract the RADJ.ADJ[5:0] bits from the 64-Hz counter count value every 8192 seconds. 1 (1): In normal operation mode, add or subtract the RADJ.ADJ[5:0] bits from the prescaler count value every 8 seconds. In low-consumption clock mode, add or subtract the RADJ.ADJ[5:0] bits from the 64-Hz counter count value every 2048 seconds. |
| CNTMD | Count Mode Select 0 (0): Calendar count mode 1 (1): Binary count mode |